BUY 3 SAME WATCH MOVEMENTS, GET 5% OFF EACH ONE!
*WHOLESALE TRADE ONLY* SALES TO WATCHMAKERS & JEWELERS!
California Resale Certificate Form
support@timeconnectioninc.com
Removes all sizes of cannon pins easily, as well as hands on large watches. Has sturdy jaws and side springs. Pusher blocks have long strokes.Presto #2 Cannon Pinion Remover
Designed to remove the smallest sweep wheels as well as large sweep wheels. Three pronged jaws will fit uneven number of spokes.Presto #3 Sweep Wheel Remover For 5 spoke wheels
Revolving turret, with four plunger o different diameters, supports the center post. Removes stubborn hands on gauges and meters as well as those on watches and clocks and does not...
Removes both regular and sweep second hands. Thin narrow jaws are very effective for countersunk curved dials.Presto #6 Second Hand Remover. Removes Both Regular & Sweep Second Hands
Turret with four plungers uses center post as support to remove hands, without touching the dial. Very useful for stop watches and curved dials.Presto Hand Remover that Removes Hands without...
Experience the precision of Bergeon's 31081-AC10 Set of 10 Aluminum Antimagnetic Screwdriver Watchmakers Set for delicate watch repairs. The ultra-soft 100% anti-magnetic blades from Swiss-made are ideally designed for quartz...
The Bergeon 31081-TETC ETACHRON Regulator Adjusting Screwdriver Tool is a precise instrument designed for turning ETACHRON pitons and finely adjusting the spiral centering between racket pins. With a Bergeon 31081-TETC...
• Anodised aluminium body• Modes: "Stop", "Left-hand winding" and "Right-hand winding• Activation of the rotation by pressing the crown or by pulling the ring slightly• Battery: Nimh LR03 (AAA)• Battery...
Made in Switzerland. Removes, measures, and inserts all types of spring bars. End of tool are made of tempered steel with one end flat and the other pointed to permit...
These Bergeon 3743-PB Anti-magnetic Tweezers are made of stainless steel and are specifically designed for polishing buckles and caps. The steel inserts are brazed and have a hardness of 54...
Made in Switzerland. Reversible movement holder will take all shapes and size from 12 to 30mm.Bergeon Movement Holder 3 3/4 x 11 Ligne.
Made in Switzerland. For calibers 3 3/4 to 11 lignes. Tightening on external from 12 to 30mm.Reversible Synthetic Movement Holder, For calibres 3 3/4''' - 11'''
Made in Switzerland. For calibers 8 3/4 to 19 lignes. Nickelled and sanded.Bergeon Movement Holder 8 3/4 x 19 Ligne.
Made in Switzerland. For calibers 8 3/4 to 19 lignes. Tightening on external from 30 to 48mm.Reversible Synthetic Movement Holder, For calibres 8 3/4''' - 19'''.
Swiss made. Set of 3 chromed screwdrivers with set screws to keep blades tight. Sizes: 0.50, 0.60 and 0.80 mm. Includes 3 spare blades.Bergeon Chromed Plated 3 Screwdrivers 0.5, 0.6,...
Bergeon 4070-3A Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 6 spokes. Red handlePresto #3...
Swiss Made. 105mm.Pin Vise for Holding Hairsprings
Made in Switzerland. Removes and inserts immediately, crystals without dis-assembling the watch. Wil not damage the crystal. For any unbreakable crystal without tension ring. Tools are delivered with standard platform.
Will not damage the tube or mar the case. Exerts an even pressure on the crown and case to lift the crown straight off without snapping. Can also be used...
Bergeon 4509, Silicon 7, Watch-case and crowns sealant, 10 Grams
Swiss made, Used for removing dust from watches. Has a PVC nozzle. 130mm.Bergeon Dust Blower #4657 Length: 130 mm
Swiss made. With regulated opening system. 120mm.Cannon pinion tightener with regulated opening system
Bergeon 4854 Cannon Pinion Remover Swiss made. For small and large movements, adapted to all calibers.
Swiss made. Set of 3 chromed screwdrivers with set screws to keep blades tight. Sizes: 0.50, 0.60 and 0.80 mm. Includes 3 spare blades.Bergeon Non-Magnatic 3 Screwdrivers w/3 Spare Baldes,...
Bergeon 4932 Professional Watch Case Knife Opener Swiss made professional quality case back remover knife. Overall length is 4.5" (115mm).
Can be fitted to the bench vice. Body of polyamide, chuck of red PVC. Capacity maximum 35mm. Size 45 x 35 x 65mm.Bergeon Vice for Watch Cases.
Vibrograph #B200, 36mm width, Blue inked paper. 36mm, Blue inked paper.Bergeon Timing Machine Plain Paper 36mm, Blue inked paper.
Felt with hollowed center, covered with stamoid, non-scratching the crystals. Diameter 53mm and height is 13mm. Holded by a nickelled brass ring.Casing Cushion, Felt with hollowed centre Diameter: 53 mm....
With a synthetic ring. Central hollowed felt covered with stamoid, non-scratching the crystals and the cases. Provided with nonskid coating. Diameter 80mm and the height is 15mm.Casing Cushion, Felt with...
Pamper your watchcases with this soft, scratch-free Transparent Gel Casing Cushion, designed to perfectly match different watchcase geometries. Diameters Available: 55MM (clear), 55mm (Black), 75mm (Black) or 75MM (Clear)
Swiss made. Abrasive block in silicon carbide and synthetic rubber for polishing, de-rusting, cleaning etc. Size: 3 1/8x 2x 3/4 Instructions for use: Use dry. Water, soap, petroleum etc. may...
Swiss Made. Bergeon double sided straight wall metal dies. Reversible stakes. For fitting bezels and tension rings into divers watches and certain case backs. Can be use with Bergeon or...
Bergeon Reversible stakes. In durAluminum. Big sizes. 52x50mm, 56x54mm, 60x58mm, 64x62mm.Bergeon XL Reversible Stakes (4 Large Sizes)
Bergeon Swiss Made. Duralumin stakes are formed as to provide an exact fit over the crystal. Controlled pressure in the press allows for easy insertion. Because of the very fine...
Bergeon Set of 9 Bakelite lower stakes for plain glass crystals, in sizes 12 thru 40mm.Bergeon Crystal & Case Press- 9 Stakes
Swiss Made. For opening Oyster cases manufactured by Rolex. Contains wrench and 6 milled chucks in the following sizes: 18.5, 20.2, 22.5, 26.5, 28.3, 29.5mm,Bergeon Rolex Oyster Case Opener
To be used with case openers BG-5700-RO.Set of 6 Rings with Holder for BG-5700 Press
Made in Switzerland. Apparatus for testing the water resistance of watch cases. • Tests the water resistance of watch cases, under normal conditions of wear. • Pressure gauge has a...
Bergeon Silicone Grease 100 GramsBergeon 5667 Silicone Grease (100 Grams)
Vise with 4 Tips. To be used with case openers. No BG-5700-A, No BG-5700-Z, and BG-5700-RO. Very sturdy. With 4 adjustable plastic jaws.Vice for Holding Waterproof Watches of Special Shape
Content: 1 bottle luminous powder, 1 bottle varnish, 1 bottle thinner, 1 oiler and 1 round tray. Mix the powder 1/1 and the varnish 1/1. Add thinner if the mixture...
Bergeon 5680 Refills for Thinner Varnish and Luminous Powder
Can be fitted to the bench vice. Body of polyamide, chuck of red PVC. Large model. Capacity maximum 65mm. Size 70 x 40 x 100mm.Watch Case Vice for waterproof watches...
Introducing the Bergeon 5700-62-6 Die Set - the perfect tool for watchmakers. Made by the renowned Swiss brand Bergeon, these new suction upper dies come in a set of 6...
Bergeon 5700-A Vise for Opening and Closing Waterproof Watch Cases Bergeon 5700-A Swiss Made. Bergeon two jaws each for watch cases with square notches, straight edges, curved edges and for...
Swiss Made. Bergeon case opener to open and close Rolex Oyster watch cases. Complete tool includes assortment of 6 dies with intermediate holder (BG-5538) and case vise with 4 tips...
Bergeon 5700-Z Vise for Opening and Closing Waterproof Watch Cases Special Order Item (Must Call In) New Model with big head, opening up to 60 mm. This Bergeon 5700-Z opener is...
